I'm so excited to share Paperless Paper Piecing with you! I almost don't know where to start. ;)
My mom, Sharon Schamber, developed the Paperless Paper Piecing technique more than 10 years ago. It is a simple technique, that allows you to "paper-piece" with precision, limitless possibilities, and no paper to tear out in the end. Once you wrap your mind around the technique, you'll discover the ease with which you can create, using Paperless Paper Piecing. If you've seen my tutorial on Piec-lique Circles, you're one step toward understanding Paperless Paper Piecing (PPP). Piec-lique and PPP are actually the same technique. Piec-lique is specific for curved seams, whereas PPP is specific to straight seams.
The Square in a Square block has been around forever. It's also know as an Economy Block. There are many ways to sew one together, including paper piecing and traditional piecing. Paperless Paper Piecing gives you another option. I hope that learning Paperless Paper Piecing, on a well-known and simple block, will help you discover what the technique is all about, and how you can use it with other blocks. Paperless Paper Piecing opens up many possibilities. Any paper pieceing pattern can be converted to Paperless Paper Piecing. I hope that you give it a try.
Paperless Paper Piecing designs are constructed upside down. We'll be layering each piece, in the reverse order that the pieces will be sewn. In paper piecing, we start at the beginning, and work out. With PPP, we start at the end, and work inward. This can be done because we are layering and glue basting, as we go. Sewing will be done once the entire block is assembled. Sewing is done in the same order as you would, if you were paper piecing. The best parts about PPP is that the block is already assembled, there's no shifting or having to go back and forth from the front to the back (like with paper piecing), and best of all: NO papers to pull out at the end! Woohoo!!!
This tutorial is meant as an introdution to PPP. There are so many possibilities, beyond what I'll show you here. If you're interested in learning more advanced ways for using PPP and Piec-lique, you can find many books, patterns and tutorials in my store.
Brenda, from Pink Castle Fabrics, and Katy from I'm a Ginger Monkey, have started the Economy Block Along, which is motivating many of us quilters to create with what's already in our stashes. The Economy Block Along is getting really popular on Instagram. Search the hashtag #economyblockalong for inspring ideas and color combinations.
Let's get started!!
First, you'll need to download the template for the Square in a Square, Squared PPP block. Click on the pic below to download. For printing, please make sure it's scaled at 100%. The printed block should measure 8". We will have an unfinished 8.5" block, when completed.
Two copies of the template need to be printed onto freezer paper. You can cut the freezer paper, to 8.5"x11", and print onto its paper side. Ink jet printers provide the best results. We'll be pressing the freezer paper, with our irons, and ink from laser printers tend to smear when ironing.
Let's take a closer look at the template. The block should measure 8". You'll notice several different symbols and numbers on the template.
- Bold Number - This number indicates the order that the pieces will be layered.
- Dashed Line - This indicates which edge will be turned.
- Number in a Triangle - This number indicates the sewing order.
- Fabric of choice
- Two Printed Templates, on Freezer Paper
- An Extra Piece of Freezer Paper
- Hot, dry iron
- Scissors - for fabric and paper
- Elmer's Washable School Glue, with a Fine Tip
- Spray Starch and a small bowl - I use Faultless
- Stencil Brush - 1/4" - 3/8" are good sizes to use
- Rotary Mat, Cutter and Ruler
- Sewing Machine, ready to stitch (I'm using a 50wt cotton thread, and 75/11 embroidery needles.)
**A note about freezer paper: If you use Reynolds, or another brand found at a grocery store, it will need to be preshrunk. When ironed, freezer paper shrinks in width (about 1/8"), but not length. Preshrinking it will prevent inaccuracies as you reuse the template. To preshrink your freezer paper, tear off your desired length, lay it shiny side down onto your pressing board. Lightly spray it with spray starch, and press it with a dry (NO steam) iron until it is completely flat and dry. Repeat for your second piece of freezer paper. You'll notice it pulling in on the width. Once it's dry and flat, it's ready to be used. If you order freezer paper from my mom, it doesn't need to be preshrunk.
Disclaimer: This tutorial is VERY picture heavy. When I'm showing something that might be brand new to you, I like to take pictures at each and every little step. It doesn't mean that this will take you forever to make (promise). I want you to have the best pictures that I can give you, for reference at each little step.
Step 1: Preparing the Templates
One of your printed templates will be your layout template. I prefer to iron mine to my pressing board, to keep it secure while I'm assembling my block, which is the reason for printing it onto freezer paper.
The second printed template will be cut apart, and used to turn the edges of your pieces. Iron this template to the top of another piece of freezer paper, shiny sides down. Apply a good amount of pressure to make sure that the two layers adhere completely, and without bubbles in between the layers.
Cut the templates apart, to give you at least one of each size to use for turning the edges of your triangle pieces. It's important that the edge of the template, with the dashed line, is cut nice and straight. These templates can be used many, many times. With the just the four pieces, you see in the picture, I've made 6 Square in a Square, Squared blocks.
Step 2: It's Fabric Time!
For Paperless Paper Piecing, your fabric pieces do not need to be cut accurately (yay!). A rough cut, is more than adequate. I prefer to rough cut multiple pieces at a time, leaving a finger width (3/8" ish) all the way around. I just use my scissors for cutting. This excess seam allowance will be tool for you, when you're sewing. After sewing, you'll trim it off, to a nice and neat 1/4".
Press your templates to the back of the fabric. You can press all of templates 1-4 onto their fabric pieces, or press one at a time. It's up to you. You could also cut all of your fabric ahead of time, then press all of your templates to the back of the fabric, assembly line style.
Step 3: Starching the Seam Allowance
We'll spray a bit of spray starch into the lid of the can, or a small bowl. It will likely foam up a bit. Once it settles, the liquid will be left. We'll be using the liquid for starching the seam allowances of each triangle piece.
Dip your stencil brush into the starch (it's just fine if it's still foamy).
Paint a light line of starch along the seam allowance, just next to the edge of your template. Be careful not to soak the edge of your template. Wet paper is hard to work with.
With your fingers, pull back the edge of the seam allowance, against the template, and press with your hot, dry iron. Turn and press only the edge with a dashed line on the template. Make sure it's nice and dry. If you hear a little sizzle, that's good. The sizzle tells you that the starch is doing its job.
While the freezer paper template is still warm, remove it from the fabric. Repeat for each triangle.
Step 4: Layering on the Layout Template
Beginning with fabric piece #1, line the turned edge along the corresponding edge on the layout template. Use a couple of pins to anchor it in place. Remember, we're working from the backside of the block, here.
The blue line should peek out from the turned edge of piece #1. If you cover the blue line, the block will end up being too small.
Repeat for piece #2.
Before placing pieces 3 and 4, draw a little line of glue on the outside edge of pieces 1 and 2. This will help anchor pieces 3 and 4, and stabilize the ends to prevent those wings that sometimes happen when piecing blocks like this.
Lay pieces 3 and 4, in place, and heat-set.
Draw a line of glue on the edge of the pieces, where piece #5 will lay. Lay piece #5 in its place, and heat-set. Repeat for pieces 6, 7 and 8.
You're doing a great job!! Look how nice it's beginning to look! Don't peek yet! You would hate to move the pieces out of their places.
Repeat the same process for pieces 9-12.
I love a nice intersecting point, don't you?
Oh yeah!! We're almost there!!
When placing your pieces, you can ensure accuracy by double checking that the edge of turned seam is letting that blue line peek out. If it's up too high, your point will be cut off. Down loo low, and your point will be, well, down too low.
For the final piece, draw a line of glue all around the edges of the final four triangles.
Lay your square down, and heat-set. Make sure that you're placing it right-side down, if you're using prints.
Step 5: The Big Reveal!!
This is my favorite part.
Remove your pins, and release your block from the template.
TA-DA!!!!! How'd you do?? I'm sure your block looks amazing!!
That wasn't so hard, right? Now, you have a completely stable, and secure block, all ready for some stitching.
Oh wait. I really don't like the dark turquoise that I picked for the center. Darn it.
Guess what?! Because it's just glue basted, I can easily peel it off, and place a new color in its place.
Oh yes. Much much better.
Step 6: Sewing
Let's go back to our layout template, and take a look at the numbers in the triangles. Find seam #1 on the backside of your block, and your template. You can tell that it's the first seam because it won't intersect any other seams. As you're learning PPP, it can be very helpful to label your seams with their sewing order. Once you get the hang of the process, you'll know which seams are sewn first, and may not need to label them. I use a regular old lead pencil for labeling.
See the crease, there? We made that nice sharp crease when we starched, and pressed over the edge of the seam allowance. That is now your sewing line. No need to try to calculate a perfect scant 1/4" seam! Isn't this wonderful?!
Sew right along the crease. There's no need to back-stitch, here, because you'll be sewing over each seam, as you continue. I sew with a 1.8 stitch length (or just shy of 2, on the dial of my Juki Tl-98Q).
You can hold onto the edge of the extra seam allowance, to help guide the seam, as you sew. If your allowance is too narrow, or your fingers are tired, a pair of angled tweezers works wonderfully.
If the seam isn't laying flat, angled tweezers can be very helpful for flattening it out.
This is a close-up of the bulk that I mentioned above. Keeping your needle just to the right of the bulk, at the end of a seam, will prevent any pesky pinches.
After sewing seam #1, trim it down to a nice and tidy 1/4". You can use scissors or your rotary mat, ruler and cutter. I prefer to trim at my sewing machine, so I generally just use my scissors. Repeat for seam #2.
This is a good view of seam #3, and how it intersects seams 1 and 2. If you were to sew this one first, you'd sew right over the unsewn first and second seams.
Sew along seams 3 and 4, and trim.
Give it a quick press with your iron, before moving on to seams 5-8.
Starting with seam #5, repeat the same sewing process for the rest of the block. For best results, press the back of the block after each round of seams.
On the final seams, #'s 13-16, I do back-stitch.
Take a look at that! I'm really happy with how it turned out. I hope you're happy with yours, as well.
Step 7: True It Up!
Press the block with a light spraying of starch, and your iron. Having it nice and flat will make it much easier to true-up.
After trimming, our block should be 8.5", unfinished.
To true up your block, go from the center out, lining up the 4.25" mark on the center points, and the 1/4" mark on the point on the side. This will give you an extra quarter inch all the way around the 8" design block, giving you your 8.5" block.
Trim, and repeat on the other three sides.
All trimed up and pretty.
Congratulations!! You did it! I hope you enjoyed learning Paperless Paper Piecing.
Don't go away yet. I want to show you how you can add a little improv punch of color, with PPP.
Bonus: Adding a Little Improv
As you're layering each piece, you can easily throw in a pop of color here, or there. Simply, off-set one of your triangles, anywhere in it's placement area, and add an additional piece. The additional piece needs to have one turned edge. You can place it anyway you'd like.
There's no reason to stay on the lines. Have a little fun with it! Off-set your pieces, and add in pops of color, here and there. Your final result will be unique, and a lot of fun.
When you're sewing the seams, the seam you added will need to be sewn before the seam that it intersects. For example, I added onto piece #7. Before sewing seam #10, I will need to sew my new seam, connecting the new piece onto piece #7. Once you get the hang of it, a whole new world of piecing will open up to you!
The big reveal!
Here are a few of the blocks I've made (so far).
|Very WoNky, and off-set. Lots of fun!|
Thank you for stopping by!!
And Happy Stitchin'!